✨ New Arrivals Just Dropped!Explore
HomeStore

6 In Soff-Cut Early Entry Diamond Blade - Husqvarna FLX Series

Product image 1
1 / 3

6 In Soff-Cut Early Entry Diamond Blade - Husqvarna FLX Series

6 In Soff-Cut® Early Entry Diamond Blade — Husqvarna FLX Series

Ultra-early entry (“green zone”) blade for cutting crack-control joints within hours of finishing. Built for Husqvarna Soff-Cut® saws with the triangular arbor, delivering clean cuts with minimal spalling when used with the matching anti-ravel skid plate.

Choose Your Color (Hardness)

Select the blade color that matches your aggregate & sand:

  • PURPLE — FLX 1000: Ultra-hard aggregate, non-abrasive sand.
  • RED — FLX 3000: Medium-to-hard aggregate, medium/abrasive sand.
  • ORANGE — FLX 4000: Medium aggregate, medium abrasive sand.
Tip: When in doubt, start with the harder-bond option (e.g., Purple → Red → Orange) and confirm performance on a short test cut. Adjust color if you see glazing (go softer bond) or rapid wear (go harder bond).

Key Features

  • Designed for ultra-early entry cutting in the green zone to help prevent random cracking.
  • Triangular Soff-Cut® arbor for a precise, safe fit on compatible Husqvarna Soff-Cut saws.
  • Anti-ravel skid plate use minimizes chipping and edge spall for crisp joints.
  • Dry-cutting with dust collection on Soff-Cut® systems (per saw setup).

Specs

  • Diameter: 6 in (152 mm)
  • Series/Colors: FLX 1000 (Purple), FLX 3000 (Red), FLX 4000 (Orange)
  • Use: Green concrete control joints (0–2+ hours after finishing, depending on conditions)
  • Arbor: Soff-Cut® triangular

Compatibility

For Husqvarna Soff-Cut® early-entry saws that accept 6 in blades and use the triangular arbor. Always verify your saw’s guard capacity and blade size in the owner’s manual.

What’s Included

  • Husqvarna FLX Series early-entry blade (color selected)
  • Matching anti-ravel skid plate (use a new plate with each blade for best results)

How to Pick the Right Blade

  1. Identify your mix: Aggregate hardness (soft ↔ ultra-hard) and sand abrasiveness.
  2. Match the color: Ultra-hard/non-abrasive → Purple; Medium-hard/abrasive → Red; Medium/medium abrasive → Orange.
  3. Cut in the green zone: Make the first pass as soon as the slab can support the saw without raveling.

Notes

  • Use only with the correct skid plate for the blade color/width.
  • Cut timing varies by cement, temperature, wind, and finishing method—monitor slab hardness and adjust start time as needed.

6 In Soff-Cut® Early Entry Diamond Blade — Husqvarna FLX Series

Ultra-early entry (“green zone”) blade for cutting crack-control joints within hours of finishing. Built for Husqvarna Soff-Cut® saws with the triangular arbor, delivering clean cuts with minimal spalling when used with the matching anti-ravel skid plate.

Choose Your Color (Hardness)

Select the blade color that matches your aggregate & sand:

  • PURPLE — FLX 1000: Ultra-hard aggregate, non-abrasive sand.
  • RED — FLX 3000: Medium-to-hard aggregate, medium/abrasive sand.
  • ORANGE — FLX 4000: Medium aggregate, medium abrasive sand.
Tip: When in doubt, start with the harder-bond option (e.g., Purple → Red → Orange) and confirm performance on a short test cut. Adjust color if you see glazing (go softer bond) or rapid wear (go harder bond).

Key Features

  • Designed for ultra-early entry cutting in the green zone to help prevent random cracking.
  • Triangular Soff-Cut® arbor for a precise, safe fit on compatible Husqvarna Soff-Cut saws.
  • Anti-ravel skid plate use minimizes chipping and edge spall for crisp joints.
  • Dry-cutting with dust collection on Soff-Cut® systems (per saw setup).

Specs

  • Diameter: 6 in (152 mm)
  • Series/Colors: FLX 1000 (Purple), FLX 3000 (Red), FLX 4000 (Orange)
  • Use: Green concrete control joints (0–2+ hours after finishing, depending on conditions)
  • Arbor: Soff-Cut® triangular

Compatibility

For Husqvarna Soff-Cut® early-entry saws that accept 6 in blades and use the triangular arbor. Always verify your saw’s guard capacity and blade size in the owner’s manual.

What’s Included

  • Husqvarna FLX Series early-entry blade (color selected)
  • Matching anti-ravel skid plate (use a new plate with each blade for best results)

How to Pick the Right Blade

  1. Identify your mix: Aggregate hardness (soft ↔ ultra-hard) and sand abrasiveness.
  2. Match the color: Ultra-hard/non-abrasive → Purple; Medium-hard/abrasive → Red; Medium/medium abrasive → Orange.
  3. Cut in the green zone: Make the first pass as soon as the slab can support the saw without raveling.

Notes

  • Use only with the correct skid plate for the blade color/width.
  • Cut timing varies by cement, temperature, wind, and finishing method—monitor slab hardness and adjust start time as needed.
Select FLX Series
From $64.05

Original: $183.00

-65%
6 In Soff-Cut Early Entry Diamond Blade - Husqvarna FLX Series—

$183.00

$64.05

Description

6 In Soff-Cut® Early Entry Diamond Blade — Husqvarna FLX Series

Ultra-early entry (“green zone”) blade for cutting crack-control joints within hours of finishing. Built for Husqvarna Soff-Cut® saws with the triangular arbor, delivering clean cuts with minimal spalling when used with the matching anti-ravel skid plate.

Choose Your Color (Hardness)

Select the blade color that matches your aggregate & sand:

  • PURPLE — FLX 1000: Ultra-hard aggregate, non-abrasive sand.
  • RED — FLX 3000: Medium-to-hard aggregate, medium/abrasive sand.
  • ORANGE — FLX 4000: Medium aggregate, medium abrasive sand.
Tip: When in doubt, start with the harder-bond option (e.g., Purple → Red → Orange) and confirm performance on a short test cut. Adjust color if you see glazing (go softer bond) or rapid wear (go harder bond).

Key Features

  • Designed for ultra-early entry cutting in the green zone to help prevent random cracking.
  • Triangular Soff-Cut® arbor for a precise, safe fit on compatible Husqvarna Soff-Cut saws.
  • Anti-ravel skid plate use minimizes chipping and edge spall for crisp joints.
  • Dry-cutting with dust collection on Soff-Cut® systems (per saw setup).

Specs

  • Diameter: 6 in (152 mm)
  • Series/Colors: FLX 1000 (Purple), FLX 3000 (Red), FLX 4000 (Orange)
  • Use: Green concrete control joints (0–2+ hours after finishing, depending on conditions)
  • Arbor: Soff-Cut® triangular

Compatibility

For Husqvarna Soff-Cut® early-entry saws that accept 6 in blades and use the triangular arbor. Always verify your saw’s guard capacity and blade size in the owner’s manual.

What’s Included

  • Husqvarna FLX Series early-entry blade (color selected)
  • Matching anti-ravel skid plate (use a new plate with each blade for best results)

How to Pick the Right Blade

  1. Identify your mix: Aggregate hardness (soft ↔ ultra-hard) and sand abrasiveness.
  2. Match the color: Ultra-hard/non-abrasive → Purple; Medium-hard/abrasive → Red; Medium/medium abrasive → Orange.
  3. Cut in the green zone: Make the first pass as soon as the slab can support the saw without raveling.

Notes

  • Use only with the correct skid plate for the blade color/width.
  • Cut timing varies by cement, temperature, wind, and finishing method—monitor slab hardness and adjust start time as needed.